ZHANGQING 16 Port PoE Injector Gigabit GPOE-16AB-48V120W 48V

GPOE-16AB-1U PoE injector operates in both Mode A and Mode B - Mode A Pins- 1/2 (-), 3/6 (+), Mode B Pins - 4/5 (+), 7/8 (-) and it allows 10/100/1000 Mbit/s data transmission ( all 4 data pairs active for gigabit data rates and shared data and power via a transformer isolated power injection on A and B mode pairs).

This option is included a 48-volt 120-watt power supply, GPOE-16AB-48V120W is available for IEEE 802.3af passive PoE devices or 12-volt PoE devices; For no power supply option see GPOE-16AB-1U.

When it operates in Mode B: a) 56-volt power input for IEEE 802.3at passive (for up to 300 watts total or 60 watts per port, 2 supplies required); b) 48-volt input for IEEE 802.3af passive; c) 24-volt input for both IEEE 802.3af and 24-volt; d) 24-volt input for 24-volt passive as Ubiquiti/Mikrotik/OpenMesh/Tranzeo.

When it operates in Mode A: a) 56-volt power input for IEEE 802.3at Passive (for up to 300 watts total or 60 watts per port, 2 supplies required); b) 48-volt input for IEEE 802.3af passive; c) 48-volt or 56-volt input for both IEEE 802.3af and 24V (Passive and 802.3af at the same time).

GPOE-16AB-1U in 1.75 x 19 x 2 inches in 1U standard height for rack-mount installation; 650 ma automatic resettable fuse on each port (one for each mode); Power is equally shared as needed by the devices; With 4 LED status indicators - 1 master power LED in Green, the LED off when 0~100 mA, Green when 100~1000 mA, and Yellow when more than 1000 mA.